Setting the Hard Disk Drive(s)
The SETUP program lets you select the type of hard disk
drive(s) installed in your computer. If you have two hard disk
drives, the first one is drive 1 and the second one is drive 2. Be
sure to choose the correct setting for both drives.
Follow these guidelines:
If your system does not have a hard disk, select
installed for drives 1 and 2. If you have only one hard
disk drive, select Not installed for drive 2.
If your computer came with an Epson 240MB hard disk
drive (or if you installed this drive yourself), select type 34
for drive 1.
If you have installed another type of hard disk drive, you
need to select the drive type that matches your drive. See
"Hard Disk Drive Types" below.
Hard Disk Drive Types
If you installed a hard disk in your computer that is not the
standard Epson 240MB drive (type 34), you need to select the
correct type to match your drive.
The following table lists the types of standard hard disk drives
you
use. Check this table and the documentation supplied
can
with your hard disk to find the correct type number for your
drive. (Your drive's documentation should list all the
parameters necessary to identify it in this table.) If none of the
types listed matches your drive, see "Defining your own drive
type: below.
Running the SETUP Program
Not
2-19