Epson Equity 386SX User Manual page 43

Some errors, such as
you to set a default value, so the screen does not display the
Set default value
errors, press
E
so you can enter a new setting.
Note
If you see the message Real-time
l o s t power, contact your Epson dealer. You
correct this error using the Setup program.
2. Be sure is highlighted and press
Y
program changes the setting that caused the error to a
setting that is more likely to match your system
configuration. The screen displays the main Setup menu:
Display
Password
Fast boot
Auto speed
Real-time clock
Hard disk drive
Diskette
Serial / Parallel
You should check all the settings in the Setup program to
make sure they are correct for your system. The default
value for the setting that caused the error may not be the
correct one for your particular configuration.
Time i
prompt. If you see one of these
the screen displays the main Setup menu
;
SC
Exit
drive
Running the Setup Program
s do not allow
invalid,
clock has
The Setup
Enter.
cannot
2-5