Epson Equity 386SX User Manual page 56

2. To select
menu such as the following:
** SAVE SETTINGS **
Drive 1:
Number of cylinders
Number of heads
Number
Precomp. cylinder
Landing zone
Total capacity (MB)
The submenu lists the settings you can change for each
drive: the number of cylinders (tracks), the number of read/
write heads, the number of sectors, the precompensation
cylinder, the landing zone (the cylinder on which you want
to park the heads when moving the computer), and the
total storage capacity in megabytes.
3. If you want to change the settings for Drive 1 (which is
drive C on most computers), press
Drive
Drive 2, press
Drive 2:.
Press
4. Enter.
5. If you want to change the drive type and the configuration
of the hard disk you are installing matches one of the drive
types listed in Appendix E, go to step 6.
2-18 Running the Setup Program
Hard disk drive,
Change settings
Type 17
of sectors
1:. If you want to change the settings for
and then + to highlight
Enter
You see this submenu:
press
Drive 2:
977
Number of cylinders 0
5
Number of heads
17
Number of sectors
300 Precomp. cylinder
971
Landing zone
40.5 Total capacity (MB) .0
Enter
see a
Enter. You
None
to highlight
0
0
0
0