Installing Or Removing An Internal Drive - Epson EISA Tower User Manual

9. Replace the computer's front panel and cover as described
in Chapter 4; then follow the "Post-installation Setup
Procedures" at the end of that chapter to update your
configuration.

Installing or Removing an Internal Drive

Before you install or remove an internal drive, you must
remove the internal drive housing from the computer. Follow
the steps in this section to do the following:
Remove the internal drive housing
Install or remove an internal drive
Reinstall the internal drive housing.
These instructions describe installing or removing an IDE hard
disk drive; however, you can use them to install or remove
other types of internal drives as well.
divider
gap
6-13