Table of Contents
Advertisement
Connecting Peripheral Devices
You may not want to connect all your peripheral devices before
you run the System Configuration program for the first time. If
you'll be installing ISA cards after running the program, you
may want to connect only those devices necessary to perform
the program's functions. If you connect other devices, you will
need to disconnect them later to install the ISA cards.
You must connect a monitor and a keyboard to run the System
Configuration program. You may also want to connect a
printer and a mouse.
As you set up your computer, leave this manual's back cover
foldout open so you can refer to the illustrations identifying the
different parts of the computer.
The following icons mark the built-in interfaces on the back of
the computer:
mouse icon
Caution
Although the keyboard and mouse ports are physically
identical, you cannot use them interchangeably. Be sure to
plug the keyboard and the mouse into the correct ports.
keyboard
icon
serial icons
Setting Up Your System
parallel icon
1-5
Advertisement
Table of Contents
