Removing A Drive From The Front Internal Drive Bay - Epson ActionTower 7500 User Manual

Hide thumbs Also See for ActionTower 7500:
Table of Contents

Advertisement

6.
If you have finished installing drives, replace the computer's
cover, as described under "Replacing the Cover" in
Chapter 4. Then see "Using the Fixed Disk Setup Option"
in Chapter 2 for instructions on defining your new drive
configuration.

Removing a Drive From the Front Internal Drive Bay

You may need to remove a hard disk drive for service or for
replacement.
Caution
Before you remove a hard disk drive, make sure you have
backup copies of all your files and programs. You can use
backup software or the backup utility in your operating
system. Refer to the online help files or software
documentation for instructions.
If your system included a Recovery CD-ROM, it contains an
image of your hard drive as it was configured at the factory.
You can use this CD-ROM to restore the original files that
came on the hard drive; you cannot restore any data files
you have created.
6-8
Installing and Removing Tower Drives

Advertisement

Table of Contents
loading

Table of Contents