Table of Contents
Advertisement
6-1 Installing Disk Drives
Three 5.25" and two 3.5" disk drives may be installed in the system
unit. Installation of a hard disk is essentially the same as that for a
floppy disk.
You may at sometime want to add to or change your floppy or hard disk
drives. Follow the instructions below to do so.
Be certain to refer to the manuals for both the disk drive and the
controller card for any additional specific information regarding them
that may be of importance.
Installing 5.25 Disk Drives
To install a 5.25" disk drive, follow the steps below:
Figure 6-1: Fastening Metal Guides to a 5.25 Disk Drive
2
Chapter 6: Appendix
• Open the system unit case as described in Chapter 2. Refer
to figure 2-18.
• Screw the metal guides to the disk drive as shown below:
Advertisement
Table of Contents
