Table of Contents
Advertisement
If you use DTK or Phoenix BIOS with shadow RAM, you can enable
or disable these two shadow RAM functions through your BIOS setup.
Refer to the system setup manual for more information.
Table 2-7: Shadow RAM Control Ports
If your BIOS does not support shadow RAM, and you may use the
program resident in the diskette included with this mainboard to set up
the shadow RAM driver.
To install shadow RAM program, follow the setps below:
The shadow RAM function is now installed and your AUTOEXE.BAT
file has been modified by the installation program. The shadow RAM
function will automatic active after you reboot your system.
If you want to update your shadow RAM function. You may run the
"SHADOW.EXE" file and modify the shadow RAM as you desired.
12
Chapter 2: Setting Up your System
Insert the diskette into drive A and enter a:.
•
Enter this command:
•
SH INST
Respond to the prompts on your screen according to your
•
request.
Advertisement
Table of Contents
