32-Bit Memory Expansion Bus; 32-Bit Memory Expansion Bus Signals - Datatech Enterprises Apex 386/25 User Manual

32-bit Memory Expansion Bus

The 32-bit-memory expansion bus optimizes the memory subsystem
to take advantage of the 32-bit architecture of the 80386. The PEM-
2530 mainboard and PEI-306 RAM Board allow for the configuration
of extended local memory up to 16MB. This bus is not intended to be
a general-purpose, industry standard 32-bit bus. It is simply a
mechanism to optimize the performance of the PEM-2530 memory
subsystem for the 80386 architecture.

32-bit Memory Expansion Bus Signals

These bidirectional signals should be driven during 32-bit memory
access when qualified by the SBEO signal going active.
These bidirectional signals should be driven during 32-bit memory
access when qualified by the SBEl signal going active.
These bidirectional signals should be driven during 32-bit memory
access when qualified by the SBE2 signal going active.
These bidirectional signals should be driven during 32-bit memory
access when qualified by the SBE3 signal going active.
These output signals address memory devices on the 32-bit memory
bus.
This output signal (active low) indicates when the 32-bit memory board
should operate on DO through D7.
28
Chapter 6: Appendix
• D0, D1, D2, D3, D4, D5, D6, D7
• D8, D9, D10, D11, D12, D13, D14,015
• D16, D17, D18, D19, D25, D21, D22, D23
• D24, D25, D26, D27, D28, D29, D30, D31
• MAO-MA7,1MA8,2MA8, MA9
• SBEO