Table of Contents
Advertisement
Connecting Cables to Floppy Disk Drives
• First, connect the four-wire power cable to the disk drive.
Figure 6-6 : Connecting to a Floppy Disk Drive
• Then, connect the controller cable: one end to floppy disks
and the other end to the FDC card with the colored-line side
of the cable attached to pin 1of the connector on the FDC
card.
To Drlve A
Drive B
Figure 6-7: Connecting Cables to Floppy Disk Drives
6
Chapter 6: Appendix
Advertisement
Table of Contents
