Table of Contents
Advertisement
Running the Setup Program
The menu of the setup program highlights the selected command. You
can use the up < # > and down < $ > arrows to select the desired item.
Pressing the enter key < 8
screen. If the option on the screen does not match your configuration,
you have two ways to make modifications. You may either highlight
selections and press < 8
and right < ' > arrows to show different options and select from them.
If you want to exit a current screen, you may press <Esc> or select
the exit item of the screen.
The following are some examples of setup program screens you will
see in using the program.
14
Chapter 3: Operating Your System
> confirms your selection or enters the next
> to enter the command or use the left ,< ' >
Advertisement
Table of Contents
