Table of Contents
Advertisement
Secure the end of the card to the computer with the retaining
4.
screw.
InstaIling a HaIf-length Card
Follow these steps to install a card in one of the half-length
slots:
1. Remove the retaining screw securing the slot cover bracket.
Remove the bracket by lifting it straight up and out of the
small metal holder at the bottom.
Remove the slot cover for the slot you are going to use
2.
Hold the card along the top corners with the components
3.
facing down and guide it into the slot. Once the connectors
reach the slot, push the card in firmly (but carefully) to
insert it fully. You should feel the card fit into place. If it
does not go in smoothly, do not force it; pull the card all the
way out and try again.
Installing and Removing Options
4-17
Advertisement
Table of Contents
