Control Levers - IHI IC75 Operation Manual

Control levers

Travel lever
Use this lever to control machine traveling.
Forward: Push the travel lever forward.
Stop: This is the neutral position.
Backward: Pull the travel lever backward.
Dump lever
Use this lever to control dumping.
Raise: Pull the lever up to raise the body.
Hold: This is the neutral position.
Lower: Push the lever down to lower the body.
The body stops at the current position when the lever is
returned to the neutral position.
Dump lever lock
This lock prevents the body from moving if you touch the
dump lever by mistake.
Locked position: Dumping is disabled.
Free position: Dumping is enabled.
IC75 ENG
CONTROLS
Forward
Lower
2-9
Stop
Stop
Raise
Dump lever
Free
Locked
Backward