Electric System; Change The Fuses; Change The Fusible Link - IHI IC75 Operation Manual

ELECTRIC SYSTEM

Change the fuses

•
Be sure to set the engine key switch to the OFF
position before replacing the fuses.
•
Do not use wires, silver foils, etc. instead of
fuses.
If such materials are used, the wires may
overheat and burn, resulting in a fire.
•
If lamps fail to go on or devices in the electric
system fail to work, the fuses may have been
blown out. Check the fuses and replace a
blown fuse with a fuse of the same capacity.
•
If a new fuse still blows out after replacement,
ask IHI's sales service dealer for checks.
1. Unlatch and detach the fuse cover (1).
2. Replace the blown fuse with a new fuse of the same
capacity.
Fuse capacity
30A
10A
15A
20A
20A
20A
20A
20A

Change the fusible link

If power is not turned on even though the engine key
switch is set to the ON position, the fusible link (2)
between the battery and the engine key switch circuit may
have blown out. Detach and check the fusible link.
Replace it with a new fusible link, if it has blown out.
IC75 ENG
MAINTENANCE
IMPORTANT
Circuit name
Engine main relay
Electromagnetic fuel pump
Emergency stop switch
Monitor panel, 2-speed travel select
switch
Horn, back lamps, radio & cigarette
lighter
Engine tachometer, car heater &
safety warning device
Head lamps & direction indicator
lamps
Parking brake & gate lock lever
4-30