Precautions Before Operation - IHI IC75 Operation Manual

1

PRECAUTIONS BEFORE OPERATION

READ AND UNDERSTAND THE WARNINGS SIGNS
AND LABELS
• There are several specific safety signs on your
machine. Please take the time to familiarize yourself
with these safety signs.
Make sure that you can read all safety signs.
• You must replace a label if it is damaged, missing or
cannot be read. If a label is on a part that is replaced,
make sure a new label is installed on the replaced part.
OPERATION SHOULD BE IN GOOD HEALTH.
Operator should be physically and mentally alert, which is
one of the best insurance against an accident.
NEVER operate the machine under the influence of
alcohol, medication, or intoxication.
WEAR PROPER WORKING CLOTHES.
• For the sake of safety during driving, wear clothes that
match your body. The sleeves of sloppy clothes can
get caught in the machine and can cause unforeseen
accidents.
• Always wear protective cap and safety boots.
Wear a hard hat, protective glasses and other
protective equipment as required by job conditions.
PERFORM "WALK-AROUND" INSPECTION.
Walk around the machine to check safety guards, plates,
and other related parts are set in place. Do not attempt to
operate the machine when any unsafe condition is
detected.
MAKE A WORK PLAN.
• Start the work only after discussing with the person in
charge at the site the rules and precautions inside the
work place as well as the work procedure.
• When working together with other persons, determine
the signals and who is to give those signals.
IC75 ENG
SAFETY
1-1