Table of Contents
Advertisement
WHEN WORKING UNDER TRACKS
There is the danger of an accident of being caught under
the machine if the machine comes down.
Place supporting pillars or blocks under the crawler and
make sure that it is supported firmly.
ALWAYS RELEASE PRESSURE BEFORE
DISCONNECTING HYDRAULIC LINES.
There is the danger of high pressure oil jetting out if a
piping or a hose is removed without releasing the internal
pressure of the hydraulic system. Start the work only
after completely releasing the internal pressure.
SUPPORTING THE BODY
If replacement or repair of couplings or hoses is made
with the body in the raised condition, there is the
possibility that the body drops down.
Always support the body using the safety bar, and also
lock it using the dump lever.
DO NOT WATCH THE RELIEF VALVE WHEN
ADJUSTING TRACKS.
• Track adjusting grease is under high pressure. Grease
coming out of the check valve under pressure can
penetrate the body causing injury or death.
• Watch the track or track adjustment cylinder to see if
the track is being loosened. Loosen the check valve
one turn only.
• Do not put your face, hand, foot, or body in front of the
check valve.
IC75 ENG
SAFETY
1-8
Supported
the body
Advertisement
Table of Contents
