Table of Contents
Advertisement
LUBRICATE THE GREASE
Refill the grease nipples with grease using a grease gun.
Remove oozed old grease after refilling.
Body
Be sure to set the safety bars under the body when
lubricating with the body raised.
• Hinge pins of the body rear gate (1)
• Lock pins of the body rear gate (2)
• Control springs of the body rear gate (3) 2 positions
• Body joint pins (4)
• Dump cylinder rod pins (5)
• Dump cylinder foot pins (6)
Oscillating link
• Oscillating link pins (7)
Grease the link pins everyday before starting works
if the machine is used on damp grounds or in mud.
Control lever
• Foot pin of the travel lever (8)
• Foot pin of the dump lever (9)
• Link pin of dump lever linkage (10)
IC75 ENG
MAINTENANCE
WARNING
IMPORTANT
2 positions
2 positions
2 positions
2 positions
2 positions
8 positions
1 position
1 position
1 position
4-7
Advertisement
Table of Contents
