Sulzer XJ 900 Starting And Operating Instructions

Sulzer XJ 900 Starting And Operating Instructions

Submersible drainage pump

Advertisement

Submersible drainage pump XJ 900
Starting and operating instructions
en
(Original instructions)
www.sulzer.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XJ 900 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sulzer XJ 900

  • Page 1 Submersible drainage pump XJ 900 Starting and operating instructions (Original instructions) www.sulzer.com...
  • Page 2 The hoist must be adequately dimensioned for the total weight of the Sulzer units (including lifting chains or steel ropes, and all accessories which may be attached). The end user assumes sole responsibility that lifting equipment is certified, in good condition, and inspected regularly by a competent person at intervals in accordance with local regulations.
  • Page 3 Handling The pump can be transported and stored either vertically or horizontally. Make sure that it is secured and cannot roll. CAUTION! The pump must always rest on a firm surface so that it will not overturn. This applies to all handling, transport, testing and installation.
  • Page 4 Regular inspection and preventive maintenance will ensure more reliable operation. The pump should be inspected every six months, but more frequently if the operating conditions are difficult. For a complete overhaul of the pump, please get in touch with an authorized Sulzer workshop or your Sulzer dealer. CAUTION! If a cable is damaged, it must always be replaced.

Table of Contents