Western Digital WD Dual-option User Manual page 9

3. In the next screen, select the Recommended installation option and click Next.
4. After installation is complete, click Finish.
Note: If running Windows 98SE/Me/2000 and the operating system updates are not
installed, you will need to install them now and restart the computer before installation
can proceed. If after installing the Dantz software and rebooting, the system prompts you
to insert the operating system CD, follow the instructions as prompted. The system will
load HID (Human Interface Drivers) that have been previously installed for another
device.
5. Launch Retrospect Express from the Start menu. Go to Start > Program Files >
Retrospect > Retrospect 6.5. The software immediately asks you for a license code. Since
your Western Digital edition is pre-licensed (for supported operating systems only), the
license code field will already be completed. Click OK.
Note: If you encounter an error dialog in this setp, make sure you have a supported
operating system installed.
WD DUAL-OPTION MEDIA CENTER AND COMBO HARD DRIVE
USER MANUAL
SETTING UP THE DRIVE - 5