Example: Recording A Race Lap Time; Viewing Measured Data Records - Casio 5707 Operation Manual

Example: Recording a Race
Lap Time
This section explains how to record lap times
while watching a race. It also shows how you
can view lap times with CASIO WATCHES
after the race is over.
Lap Times
l
During a race
Measure lap times.
1. X
Hold down (D) for at least two seconds.
This will cause the watch to enter the
Timekeeping Mode.
2. X
Press (D) once.
This will cause the watch to enter the
Stopwatch Mode.
1/1000 seconds
Minutes, seconds
Speed
Watch Operation Guide 5707
3. X
Use the operations below to measure
lap times.
Pressing (E) at the end of each lap will
record each lap time in watch memory.
Lap times are recorded in 1/1000-
●
second units during the first hour of an
elapsed time measurement session.
After one hour, times are recorded in
1/10-second units.
4. X
Press (A) to reset the stopwatch time to
all zeros.
5. X
Hold down (D) for at least two seconds
to return to the Timekeeping Mode.
After a race
After the race is finished, you can view the
measured lap times with CASIO WATCHES.
Sending Stopwatch Data to a Phone
l
Checking Sent Data
l
E
Start
E
E
A
Stop
Viewing Measured Data
Records
You can use the procedure below to view lap
time records.
1.
Enter the Recall Mode.
Navigating Between Modes
l
2.
Use (E) to cycle through lap numbers.
Each press of (E) advances
●
sequentially through the lap numbers
from [001] to [200].
Lap number
E
E
E
E
3.
Press (A) to display the lap time of the
currently displayed lap number.
Note
Each lap time measurement (from start
●
to reset) records a lap time record of
the lap time and lap number.
23