Settings - auna Connect 120 MKII Manual

SETTINGS

Setting an alarm
1. Press and hold the MENU/INFO button to view the main menu.
2. Turn and press the NAVIGATE dial to select 'Alarms'
3. Turn and press the NAVIGATE dial to select 'Alarm 1' or 'Alarm 2'.
4. Turn the NAVIGATE dial to scroll through each alarm setting. If you want
to change a setting, press the NAVIGATE dial. You can set the following
alarm options:
Enable Turn and press the NAVIGATE dial to choose when
you want the alarm to repeat. The available options
are 'Off ','Daily', 'Once', 'Weekends' or 'Weekdays'.
Time Turn and press the NAVIGATE dial to adjust the
hour of the alarm. Note: If you have set to use the
12 hour time format, make sure that you select the
'AM' or 'PM' version of the hour before pressing the
NAVIGATE dial. Repeat to set the minutes of the
alarm.
Mode Turn and press the NAVIGATE dial to choose between
'Buzz', 'Internet radio', 'DAB', 'FM'.
Volume Turn and press the NAVIGATE dial to set the volume
when the alarm sounds.
Save Turn and press the NAVIGATE dial to save the alarm.
Sleep setting
This function allows you to program the unit to turn to standby mode by
itself after a set period of time.
1. Tap the SLEEP button on remote control, the sleep time icon"SLEEP OFF"
appears on the display.
2. Repeatedly tap the SLEEP button to select a sleep time. The unit will
turn off after "Sleep off-15mins - 30mins - 45mins - 60mins" Wait for 3
seconds after your selection for the unit to confirm the selection, the unit
will play for the selected length of time then automatically turn off.
3. To cancel the sleep timer, tap the SLEEP button repeatedly until timer
shows "SLEEP OFF", the sleep time icon "SLEEP OFF" disappears on the
display.
EN
59