System Settings - auna Connect 150 SE Manual

EN

SYSTEM SETTINGS

Equaliser
Several preset EQ modes are available: Normal, Flat, Jazz, Rock, Movie,
Classic, Pop, News and My EQ. Press EQ to select.
A user-defined setting is available; create your own EQ with custom bass,
treble settings.
Network
Network wizard: Enter to search AP SSID, then input the WEP / WPA key or
choose Push Button/Pin/Skip WPS to connect to the wireless network.
PBC Wlan setup: Push Button Configuration, it is to connect the AP that
supports WPS (Wi-Fi Protected Setup).
View settings: View the information of current connected network: Active
connection, MAC address, Wlan region, DHCP, SSID, IP address, Subnet
mask, Gateway address,
Primary DNS and Secondary DNS.
Manual settings: Enable or disable DHCP (Dynamic Host Configuration
Protocol). Input the SSID, WEP / WPA key and/or other configuration.
NetRemote PIN Setup: Here you can view and edit the NetRemote PIN. The
default NetRemote PIN is: 1234. The NetRemote PIN is required when you
want to connect a smartphone or Tablet PC to your radio using the feature
mentioned in Section 6.3.
Network profile: The device remembers the last four wireless networks it
has connected to, and automatically tries to connect to whichever one of
them it can find.
From here you can see the list of registered networks. You can delete
unwanted networks.
Clear network settings: Select "YES" to clear all the current network
settings. Select "NO" to cancel.
Keep network connected: If you choose to keep network connected, the
WiFi will not disconnect even you are in standby mode or non-network
mode. This option allows the device to be ready for UNDOK and Spotify
Connect connection in any modes.
Time/Date
Set the time manually or auto update, time format, time zone and daylight.
Details can be referred to Setting date and time under Section 6.3 First-time
setup
42