auna Connect 120 MKII Manual page 62

EN
62
3. Turn and press the NAVIGATE dial to choose 'Inactive Standby '.
4. Turn and press the NAVIGATE dial to choose between the Off > 2 hours >
4 hours > 5 hours > 6 hours.
Backlight
You can adjust the duration that the screen is illuminated for and the
brightness of the screen when it times out.
To adjust the duration of the screen backlight before dimming:
1. Press and hold the MENU/INFO button on main unit or remote control
and turn and press the NAVIGATE dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' >
'Backlight'.
3. Turn and press the NAVIGATE dial to choose 'Timeout'.
4. Turn and press the NAVIGATE dial to choose a timeout setting. To specify
that the backlight should always remain on, choose 'On'.
Power-on level
1. Press and hold the MENU/INFO button view the 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' >
'Backlight'.
3. Turn and press the NAVIGATE dial to choose 'On Level'.
4. Turn and press the NAVIGATE dial to choose between 'High', 'Medium' or
'Low'.
Dim level in standby
1. Press and hold the MENU/INFO button to view the 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' >
'Backlight'.
3. Turn and press the NAVIGATE dial to choose 'Dim Level'.
4. Turn and press the NAVIGATE dial to choose between 'Medium' or 'Low'.
Carrying out a factory reset
Resetting removes all presets, stored stations, alarms and resets all other
options to default settings.
1. Press and hold the MENU/INFO button on main unit or remote control
and turn and press the NAVIGATE dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' > 'Factory
Reset'.
3. Turn and press the NAVIGATE dial to select 'Yes' to reset factory settings.
Select 'No' if you do not want to reset to factory settings.