auna Connect 120 MKII Manual page 49

• Push Button > Prompts you to press the connect button on the router. It
then presses the select control.
• Pin > (code number) Generates an 8-digit code number which you enter
into the wireless router, access point.
• Skip WPS > Enter key as for a standard encrypted network, above. For
more information on setting up a WPS encrypted network, see your
WPS router's instructions.
On completion
Connection to the selected network.
If connecting fails, the system returns to a previous screen to try again. To
exit the process use the Back or MENU/INFO button.
The system remembers the last four wireless networks it has connected to,
and automatically tries to connect to whichever one of them it can find.
You can see the list of registered networks through Menu > System settings
>Network > Network profile >From here you can delete unwanted networks
by turning and pressing NAVIGATE dial then confirm delete Yes. There are
also other options for viewing and manually altering network settings from
Menu > System settings > Network.
EN
49