Getting Started - auna Connect 120 MKII Manual

GETTING STARTED

Accessories included
Carefully remove the unit and all accessories from the package.
Please verify that you have all the following accessories before recycling the
gift box.
• User Manual
• Remote Control
• AUX IN Cable
• Adapter
1. Unclip the aerial and fully extend it (steps A and B).
Insert the jack of the supplied mains adapter into the socket on the rear
of the radio (C).
Plug the mains adapter into the mains supply (D)
2. Press the Standby button to power on.
3. Setup wizard
When turning on for the first time, it runs through a setup wizard to
configure settings for date/time and network. Once this has finished, the
system is ready to use in most modes.
To change these settings later, select Menu >System settings > and select
the required settings option(s). To run the setup wizard again, select Menu >
System settings > Setup wizard.
The Network settings can be reset later by manually running the Network
wizard, select Menu > System settings > Network >Network wizard.
Select Yes to start the setup wizard. If you choose No, a second screen asks
EN
47