Getting Started - auna iTuner 320 BT Manual

EN
44

GETTING STARTED

Powering ON/OFF
1. Press the Standby button on the unit or remote control to switch the unit
on.
2. Press the Standbybutton on the unit or remote control to switch the unit
back to standby mode.
Selecting Modes
Press the MODE button repeatedly on the unit or press the USB, FM/DAB,
AUDIO IN, INTERNET, SPOTIFY button on the remote control to switch
between Music player, DAB radio, FM radio, Line in, Internet radio and
Spotify Connect modes.
When the unit is idle for approximately 15 minutes, it will automatically
switch to standby. To switch the unit off completely, remove the mains plug
from the main socket. Turn the unit off completely to save energy when not
in use.
Adjusting the Volume
Turn the VOL +/– buttons on the unit or press the VOL +/– buttons on the
remote control to adjust the volume.
If you wish to turn the sound off, press the MUTE button on the remote
control. Press the MUTE button again or press the VOL +/– buttons on the
remote control or turn the VOL +/– button on the unit to resume normal
listening.
Navigating the Menu
3. Press and hold the MENU button on the unit or press the MENU button
on the remote control to access the menu.
4. Turn the SCROLL CONTROL on the unit or press the 
5. Press the Volume +/- dial on the unit or press the ENTER button on the
remote control to conrm your selection.
Initial Set-Up
When you first connect the unit to the mains socket, the initial Setup wizard
starts.
1. To launch the initial Setup wizard, turn the SCROLL / SELECT Control
/
on the unit or   on remote control to select [YES], then press the
SCROLL / SELECT Control on the unit or ENTER button on the remote
control to confirm.
2. In the next step you can select the time format. Select the desired setting
[12] or [24] and press the SCROLL / SELECT Control on the unit or ENTER
button on the remote control to move on to the next step.
/
 button.