Plugging In The Printer; Loading A Sheet Of Paper - Epson FX-1050 User Manual

Plugging in the printer

Follow these steps to plug in
1. Be sure the printer is turned off.
2. Plug power cable into a properly grounded electrical outlet.
the
WARNING:
five seconds before turning it back on. Rapid switching on
and off can damage the printer.

Loading a sheet of paper

Next, you need to load a
FX-850) or 14 inches wide (if you
WARNING:
you have removed all protective materials. Turning on the
printer while the print head cannot move may seriously
damage the print mechanism.
If you plan to use a printer stand, make sure it meets the following
requirements:
The stand must support at least 44 lbs (20 kg) for the FX-850 and 58 lbs
(26 kg) for the FX-1050, which is twice the weight of the printer.
The stand must not tilt the printer more than 15 degrees from horizontal.
With a cut
sheet
If the paper supply is below
cannot catch on the underside of
Make sure that the power cord and
with paper feeding. If possible, secure them to a printer stand support.
1. Turn on
the
on.
Setting Up Printer
the
the
Whenever you turn off the power, wait at least
of paper that is letter size (if you have
sheet
Before turning
feeder, the stand must keep the printer level.
the
printer. The green POWER and red
printer:
an FX-1050).
have
the printer, be absolutely sure
on
printer stand, make sure that the paper
stand or on
the
interface cable do not interfere
the
stand supports.
the
lights come
PAPER OUT
an
1-13