Epson FX-1050 User Manual page 39

3. Press the
LOAD/EJECT
out of the printer and into a standby position. The paper is still
attached to the tractor, but is no longer in the paper path. The
PAPER OUT
paper path.
Note: Pressing the
back enough to reach a standby position.
not come on, press the
continuous paper, you
times. (With continuous paper narrower than six inches, you can press
the
LOAD/EJECT
4. Push the paper release lever back to the single sheet position.
Paper Handling
button to feed the continuous paper backward
light comes on when
LOAD/EJECT
LOAD/EJECT
press the
can
button only once.)
paper is completely out of
the
button once may not feed the paper
If the PAPER OUT
button again. With normal
LOAD/EJECT
light does
button up to three
the
2-11