ESCW
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
1: Mode is turned ON.
0: Mode is turned OFF.
Double-wide mode doubles the width of all characters. This command
is available in both draft and NLQ.
ESCw
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
1: Mode is turned ON.
0: Mode is turned OFF.
Double-high mode doubles the height of all characters. Superscript,
subscript, and condensed modes are not valid in the double-high
mode. This command is available in both draft and NLQ.
ESC
W
27
87
1B
57
(The ASCII codes 0 and 1 or the ASCII
characters "0" and "1" can be used.)
ESC
27
l19
1B
77
(The ASCII codes 0 and 1 or the ASCII
characters "0" and
Turn Double-Wide Mode On/Off
n
n
n
Turn Double-High Mode On/Off
n
n
n
can be used.)
"1"
Command Summary