Epson FX-1050 User Manual page 141

The simplest type of command consists of a single character to be sent to
the printer. For instance, to print in condensed mode the code format is:
A S C I I c o d e : S I
Decimal :
Hexadecimal:
This code can be sent from a program by sending the code 15 directly.
More complex commands consist of two or more character codes. For
example, to print in double-wide mode the code format is the following:
ASCII code:
Decimal :
Hexadecimal:
In this case n can be either 1 or 0, to begin or end double-wide printing.
You can use either of the following commands to turn ON double-wide
print from BASIC:
LPRINT
CHR$(27);CHR$(87);CHR$(l)
LPRINT CHR$(27);"W"; CHR$ (1)
For the following commands that use only 0 or
the ASCII codes 1 and 0 or the ASCII
ESC s, ESC U, ESC x, ESC p, ESC W, ESC S, ESC-, ESC w, and
ESC %
For example, in BASIC you can turn on double-high with either of these
statements:
LPRINT CHR$(27);"w";CHR$(l)
LPRINT CHR$(27);
8-2
15
OF
ESC W
27 87
1B 57
"w";"l"
n
n
n
for the variable, either
1
1 and 0 can be used:
characters
Command Summary