Epson FX-1050 User Manual page 184

ESC D
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
This command allows the setting of up to 32 horizontal tabs, which
are entered as n1, n2, n3, etc. (in the range 1 to 137) with the NUL
character terminating the command. The tab settings must be entered
in ascending order. ESC D NUL clears all tabs. The settings on power
up are every eight characters. The tab settings change if the character
pitch is changed, except that double-wide has no effect on the tab
positions.
ESC R
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Resets all vertical and horizontal tab settings (set by ESC B and
ESC D) to their defaults.
Command Summary
ESC D nl
27 68 nl
1B 44 nl
ESC R
27 82
5 2
1B
n1 . . .
n2 . .
n2 . . .
Restore Default Tab Settings
Set Horizontal Tabs
NUL
. 0
00
8-45