Install The Server Cover - Lenovo ThinkSystem ST250 V2 Maintenance Manual

Figure 115. Removing the server cover
Attention: For proper cooling, always install the server cover before powering on the server.
Operating the server without the cover properly installed might result in server component damage.
After this task is completed
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Install the server cover

Follow instructions in this section to install the server cover.
About this task
To avoid potential danger, read and follow the following safety statements.
• S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off
the electrical current supplied to the device. The device also might have more than one power cord.
.
Chapter 4 Hardware replacement procedures
201