Advertisement
MULTI-MON
Updating the Clock
To update the RTC clock in your device, select a site with base device address from the list box on the toolbar, check the On-line
button on the toolbar, and then select RTC from the Monitor menu.
The RTC dialog box displays the current PC time and the time in your device. To synchronize the device clock with the PC clock,
click Set.
Power Software allows you to remotely clear maximum demands and log files individually in each submeter.
To open the dialog box, select a device site from the list box on the toolbar, check the On-line button, and then select Reset from
the Monitor menu.
To reset the desired registers or to clear a file:
1. Click on the corresponding button, and then confirm your command.
2. If a target has more than one component, you are allowed to select components to reset.
3. Check the corresponding boxes and click OK.
31-00035—01
Fig. 36.
Fig. 37. Clearing Maximum Demands and Log Files
42
Advertisement
