Download Print this page

Honeywell Multi-Mon Installation Instructions Manual page 22

Multiple circuit energy monitor

Advertisement

MULTI-MON
31-00035—01
Local Network Settings
This menu allows you to configure the Ethernet modem (if present) for direct communications through
the LAN or the Internet.
To enter the menu, select the Net entry from the main menu, and then press the ENTER button. For
instructions on navigating in the menu, see Viewing and Changing Setup Items.
The following table lists available Ethernet options.
Label
IP Address
Subnet Mask
Def.Gateway
Local Settings
This menu allows you to configure your local time zone settings.
To enter the menu, select the Local entry from the main menu, and then press the ENTER button. For
instructions on navigating in the menu, see Viewing and Changing Setup Items.
The following table lists available options.
Label
Parameter
Country
Country code
Daylight
Daylight saving
time (DST)
option
DST Mon
DST start
month
DST Week DST start week
of the month
DST Day
DST start day
of the week
End Mon
DST end month
End Week DST end week
of the month
End Day
DST end day of
the week
Default
192.168.0.203
Device IP address
255.255.255.0
Subnet mask
192.168.0.1
Default gateway
Options
Default
Default, or country
Default
name
Disabled, Enabled Disabled
January-
April
December
First, Second,
First
Third, Fourth, Last
Sunday-Saturday
Sunday
January-
October
December
First, Second,
Last
Third, Fourth, Last
Sunday-Saturday
Sunday
22
Description
Description
Defines a currency and calendar settings. The
default setting stands for the U.S.A.
When DST is disabled, the RTC will operate in
standard time only. When enabled, the
Multi-Mon will automatically update the time at
2:00 AM at the pre-defined DST switch dates.
The date when Daylight Saving Time begins.
The DST switch point is specified by the month,
week of the month and weekday. By default,
DST starts at 2:00 AM on the first Sunday in
April of each year.
The date when Daylight Saving Time ends. The
DST switch point is specified by the month, week
of the month and weekday. By default, DST
ends at 2:00 AM on the last Sunday in October
of each year.

Advertisement

loading