Advertisement
CONFIGURING BILLING ENERGY AND TOU REGISTERS
The Multi-Mon provides four total/summary energy and six parallel tariff energy and maximum demand registers for each
individual submeter. The registers can be linked to any internal energy source or to another submeter.
The meter tariff structure supports six different tariffs using an arbitrary tariff schedule. A total of four types of days and four
seasons are supported with up to eight tariff changes per day.
The meter can provide automatic daily profile recording for total and tariff energy and maximum demand registers. The device
memory is sufficient to store daily profile data for 120 days.
By default, the first billing register in your meter is linked to the kWh IMPORT accumulator, and the daily profile recording is
enabled for the kWh register. Other billing registers are not operational. To activate the remaining registers or to change the
profile for the first billing register:
1. Link the Summary/TOU registers to the respective energy sources, and then configure the options for these registers like
whether the only totalization or both total and tariff registers would be used, and whether daily profiling should be enabled
for the energy usage and maximum demand registers.
2. Configure the daily tariff schedule for all types of days and seasons using the TOU daily profiles.
3. Configure the season tariff schedule using the TOU calendar.
Setting up Total and Tariff Registers
To configure the device total (summary) and TOU registers, select Energy/TOU from the Meter Setup menu.
The available options are shown in the following table:
Fig. 32.
37
MULTI-MON
31-00035—01
Advertisement
