SE56 standard
with display,
Housing in
stainless steel
Type SE56 must be combined with...
Type S051
Magnetic sensor fitting
- for low flow
The electronics Type SE56
sion or with display in compact or remote version)
nected to the magnetic flow sensor fitting Type
S051, S054, S055 or S056 is designed for
applications with liquids with a minimum con-
ductivity of 5
S/cm.
μ
The device can be parameterize either with 3
keypads
(version with display)
serial interface.
As standard, the equipment is supplied with
one or two transistor outputs and one digital
input. As options, other features are available:
such as high frequency output, current output,
PROFIBUS DP, HART.
Arrow.com.
Downloaded from
SE56
Transmitter for electromagnetic-
inductive flow sensor fittings
• Must be equipped with sensor fitting S051, S054,
S055 or S056
SE56 basic
• Continuous measurement or batch control
SE56 blind
• High accuracy
• PROFIBUS DP, HART available
Type S054
Type S055
Magnetic sensor fitting
Magnetic sensor fitting
- Wafer
- Flange
(blind in compact ver-
con-
Technical data - Electronics SE56 standard with display
Compatibility
Housing materials
Display
or by computer via a
Keyboard
Electrical connection
Medium temperature, please see separate data sheets of the complete magflowmeter 8051, 8054/8055, 8056
Environment
Ambient temperature
Operating and storage
Relative humidity
Height above sea level
Standards, directives and certifications
Protection
Standards and directives
Type S056
Magnetic sensor fitting
- Hygienic
S051, S054, S055, S056 sensor fitting
sheet 8051, 8054/8055, 8056)
Die casting aluminium or
stainless steel 304 electro-polish
Graphic display 8 lines x 16 Characters, 128 x 64 pixels
with back light
3 membrane keys
6 cable glands PG 11
- 20 ... + 60 °C
(- 4 ... + 140 °F)
≤ 85 %, without condensation
- 200 ... + 6000 m
Class I, IP67, category of installation II
The applied standards, which verify conformity with the EU
Directives, can be found on the EU Type Examination Certifi-
cate and/or the EU Declaration of conformity
www.burkert.com
(see separate data
(if applicable)
p. 1/7
Need help?
Do you have a question about the SE56 and is the answer not in the manual?
Questions and answers