Table of Contents
Advertisement
(4.0) OPERATION
(4.1) USB Recording and Playback
To set TrueMix 800FX as the default playback device on your computer, follow the
set of directions below that corresponds to your computer's operating system.
Note: If you have other USB audio devices connected to your computer, which may
have identical names, you may need to try selecting each one until the TrueMix
800FX is recognized.
Windows 10:
1.
Use the included USB cable to connect the TrueMix
800FX to your computer. Press the power switch
to power on TrueMix 800FX.
2. Press the Windows key and then type "Sound
Settings"
into
right-click the "speaker" icon in the taskbar and
select Open Sound Settings.
3. In the Windows Sound control panel select the
Output dropdown box and select USB Audio Codec.
4. Select the Input dropdown box and select USB
Audio Codec.
5. Close the Sound control panel.
Windows 11:
1.
Use the included USB cable to connect the
TrueMix 800FX to your computer. Press the
power switch to power on TrueMix 800FX.
2. Press the Windows key and then type "Sound
Settings" into the search bar. Alternatively,
right-click the "speaker" icon in the taskbar and
select Sound Settings.
3. In the Windows Sound control panel select the
Output section and select USB Audio Codec.
4. In the Input section select USB Audio Codec.
5. Close the Sound control panel.
macOS:
1.
Use the included USB cable to connect the TrueMix 800FX to your computer.
Press the power switch to power on TrueMix 800FX.
2. Go to Applications > Utilities > Audio MIDI Setup.
3. In the Audio Devices window, select USB Audio Codec in the left column.
4. Right-click USB Audio Codec and select Use this device for sound input.
5. Right-click USB Audio Codec and select Use this device for sound output.
6. Quit Audio MIDI Setup.
the
search
bar.
Alternatively,
13
Advertisement
Table of Contents
