(4.3) Using The Onboard Effects - Alto TrueMix 800FX User Manual

(4.0) OPERATION

(4.3) Using the Onboard Effects

To hear audio effects on a channel:
1. Use the EFX Select knob to choose one of the effects listed in the
table below.
2. Adjust the EFX Variation knob to select from among the available
preset (fixed) variations for your selected effect's time-based
parameters, such as reverb decay time or chorus rate.
3. Turn up the EFX Send knob on each channel that you want the
effect applied to.
Effect Description
Vocal 1 Vocal preset; reverb simulating a room
with a small decay time.
Vocal 2 Vocal preset; reverb simulating a small
space with a slight decay time.
Hall 1 Reverb; simulates a large acoustic
space.
Hall 2 Reverb, simulates the acoustics of a
small stage space.
Room 1 Reverb; simulates a studio echo
chamber with many early reflections.
Room 2 Reverb; simulates the bright sound of
a smaller studio room.
Plate Simulates the bright sound of a plate
reverb unit.
Tape Simulates the classic tape delay sound
created by multiple playback heads.
Spring Simulates the lightly stretched sound
of spring reverb from analog
transducers.
Delay 1 (Mono) Reproduces the signal after a small
period of time.
Delay 2 Reproduces the signal after a small
(Stereo) period of time with a slight difference
between the two stereo channels.
Flanger Classic sweeping stereo effect, similar
to a jet plane taking off.
Chorus Stereo effect that simulates the full,
complex, watery sound of several
instruments playing approximately in
unison.
Combo 1 Delay effect with room reverb.
Combo 2 Stereo flanger effect with room reverb. Flanger rate/Reverse decay time
Combo 3 Stereo chorus effect with room reverb. Chorus rate/Reverse decay time
Variation
Decay time/Pre-delay
Decay time/Pre-delay
Decay time/Pre-delay
Decay time/Pre-delay
Decay time/Pre-delay
Decay time/Pre-delay
Decay time/Pre-delay
Decay time/Pre-delay
Decay time/Pre-delay
Delay period
Delay period/Feedback
Rate
Rate
Delay period/Reverse decay time
15