Table of Contents
Advertisement
(3.0) FEATURES
(3.0) FEATURES
(3.1) Top Panel
1.
Mic Inputs: Connect a microphone to these phantom power-equipped inputs
using an XLR cable (sold separately). See the
for more details.
2.
Line Inputs: Connect line-level devices to these inputs with 1/4" (6.35 mm)
cables (sold separately).
Notes: The line inputs on channels 5 and 6 are stereo inputs.
Connecting a device using a single cable to only the L (Mono) input will send
the signal through both the Left and Right Main Mix Output channels.
Connecting to only the R (Stereo) line input will send the signal through the
Right Mix channel only.
3.
Gain: Turn this knob to adjust the channel audio level (pre-fader and pre-EQ
gain). Set the gain to a level at which the Peak LED just barely lights up during
the loudest parts of the song.
4.
HI EQ (Treble): Turn this knob to adjust the high (treble) frequencies of the
channel's output signal.
5.
LOW EQ (Bass): Turn this knob to adjust the low (bass) frequencies of the
channel's output signal.
6.
MON Send Knob: Turn this knob to adjust the signal volume sent from the
channel input to the Mon Send Output. This knob also adjusts the signal volume
sent back to the Bluetooth channel during use on a phone call with a connected
device. See the section
more details.
7.
EFX (Effects) Send Knob: Turn this knob to adjust the channel signal sent to
the on-board effects and the the EFX send TRS output. Use the EFX Select
knob to choose an audio effect to send to your channel inputs.
(4.2) Operation > Connecting a Bluetooth Device
Phantom Power Switch
feature
for
9
Advertisement
Table of Contents
