Alto TrueMix 800FX User Manual page 17

(5.0) TROUBLESHOOTING
If the internal EFX are not heard:
•
Check that the EFX Mute button is not activated.
•
Turn up the EFX Send knob on the channel(s) you want the effect applied to.
•
Make sure the FX Return (TO MAIN) knob is set to an appropriate level.
If you cannot connect your audio device to TrueMix 800FX via Bluetooth:
•
Have your audio device (e.g., smartphone or tablet) and TrueMix 800FX as close
together as possible while trying to connect. Make sure both the audio device
and TrueMix 800FX are unobstructed by walls, furniture, etc.
•
Reset the Bluetooth connection on TrueMix 800FX to disconnect it from any
other audio device and restart the search process. If this does not work right
away, power off TrueMix 800FX and then power it back on. See the section
Operation > Connecting a Bluetooth Device
•
Reset the Bluetooth connection on your audio device by turning Bluetooth off
and back on. You can usually find this under the Bluetooth menu in the Settings
for your phone or other audio device.
If this does not work, and you have connected to TrueMix 800FX before, find
TrueMix 800FX in the list of available or previously connected devices in your
audio device's Bluetooth menu, tap the "gear" or "i" icon located next to it and
then select Unpair or Forget. Turn TrueMix 800FX off and back on and try
pairing again once it reappears in your available devices list.
Note: If TrueMix 800FX has been paired to another audio device recently that is
still within range, you may need to repeat this process with that audio device to
fully disconnect.
for more information.
(4.2)
17