Advertisement
5.3 Checks
Whenever a cylinder is changed:
• Check that the pressure regulator shows no
visible signs of damage.
• Clean the pressure regulator using the
procedure described above.
• After each installation operation, make sure
that the functions of the pressure regulator
operate correctly.
5.4 Repair
All repairs of the pressure regulator must be
carried out by Linde, in order to guarantee the
safety and performance of the unit.
5.5 Servicing
Although these devices are very robust, they do
require periodic inspection. This work requires
a certain number of precautions to be taken,
and must be carried out by Linde. The frequency
of this inspection depends essentially on the
manner in which the device is used (intensive,
normal or occasional use); it must be agreed by
Linde and the customer. It shall on no account
exceed 5 years.
REDLINE® C 300 cylinder regulators
6. General conditions
The information provided in our catalogues is not
binding for Linde, who reserves the right to make
any modifications.
Linde retains full intellectual property of all
projects, design work and more generally any
documents sent to its customers: none of any
such material can be revealed to a third party,
executed or used in any way whatsoever without
prior written authorisation.
This instruction manual is an integral part of the
contract and general terms of sale that have been
accepted.
11
Advertisement
