Water Connection; Electrical Connection; Machine Cleaning And Maintenance - Electrolux ESR20EL5 User Manual

Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the machine's
service life. (cont'd.)
2. During these operations, gloves must protect hands from the cold tray when being removed from the
appliance. Failure to use the personal protection equipment by operators, specialised personnel or users
can involve exposure to chemical risk and cause possible damage to health (depending on the model).
3. During these operations, gloves must be heatproof to protect hands from contact with hot food or hot parts of
the appliance and/or when removing hot items from it. Failure to use the personal protection equipment by
operators, specialised personnel or users can involve exposure to chemical risk and cause possible damage
to health (depending on the model).
4. During these operations, gloves must be heatproof and suitable for contact with water and the substances
used (refer to the safety data sheet of the substances used for the information regarding the required PPE).
Failure to use the personal protection equipment by operators, specialised personnel or users can involve
exposure to chemical risk and cause possible damage to health (depending on the model).
5. During these operations, gloves must be suitable for contact with chemical substances used (refer to the
safety data sheet of the substances used for information regarding the required PPE). Failure to use the
personal protection equipment by operators, specialized personnel or users can involve exposure to
chemical risk and cause possible damage to health (depending on the model).
A.4

Water connection

• The operating water pressure (minimum and maximum) must be between:
– 100 kPa [1 bar] and 600 kPa [6 bar];
• Make sure that there are no visible water leaks during and after the first use of the
machine.
A.5

Electrical connection

• Work on the electrical systems must only be carried out by a specialised personnel.
• If the power cable is damaged it must be replaced by the Customer Care Service or in
any case by specialised personnel, in order to prevent any risk.
A.6

Machine cleaning and maintenance

• Refer to "A.3 Personal protection equipment" for suitable personal protection equipment.
• Put the machine in safe conditions before starting any maintenance operation.
Disconnect the machine from the power supply and carefully unplug the power supply
cable, if present.
• Depending on the model and type of electric connection, during maintenance operations,
the cable and plug must be kept in a visible position by the operator carrying out the work.
• Do not touch the machine with wet hands or feet or when barefoot.
• Do not remove the safety guards.
• Use a ladder with suitable protection for work on machines with high accessibility.
• Respect the requirements for the various routine and extraordinary maintenance
operations. Non compliance with the instructions can create risks for personnel.
• Extraordinary maintenance, checking and overhaul operations must only be carried out
by a specialised personnel or the Customer Care Service, provided with suitable
personal protection equipment (safety shoes and gloves), tools and ancillary means.
Ordinary maintenance
• Do not clean the machine with jets of water.
• Contact with chemical substances (e.g. detergent, rinse aid, scale remover, etc.) without
taking appropriate safety precautions (e.g. personal protection equipment) can involve
exposure to chemical risk and possible damage to health. Therefore always refer to the
safety cards and labels on the products used.
6