13. TECHNICAL INFORMATION................. 23 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Put the cutlery in the cutlery basket with the sharp • ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. Do not leave the appliance with the open door •...
ENGLISH devices fitted (water meters, etc.), let • Do not put flammable products or the water flow until it is clean and items that are wet with flammable clear. products in, near or on the appliance. • Ensure that there are no visible water 2.5 Internal light leaks during and after the first use of the appliance.
3. PRODUCT DESCRIPTION Worktop Air vent Top spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Lower basket Filters Upper basket Rating plate Cutlery drawer Salt container...
ENGLISH 4. CONTROL PANEL On/off button OK key Program key Navigation key MyFavourite key Navigation key Display Back key Delay key Option key 4.1 Key behaviour Delay key • Press to set the delay start of a Program key programme. •...
ENGLISH 5.1 Consumption values Water Energy Duration Programme (kWh) (min) 0.857 AutoFlex 7 - 14 0.6 - 1.6 40 - 170 FlexiWash 14 - 16 1.2 - 1.5 160 - 180 Intensive 12.5-14.5 1.4-1.7 170-190 Quick Plus Glass Care 12 - 14 0.7 - 0.9 82-92 Rinse &...
Page 10
Settings Values Description Volume From level 1 to level 10. Adjustment of the volume for key tones, alarm sounds and end sound. Factory setting: level 5. Brightness From level 0 to level 9. Change the brightness of the display.
ENGLISH 6.4 AutoOpen CAUTION! Do not try to close the AutoOpen improves the drying results appliance door within 2 with less energy consumption. minutes after automatic open. This can cause damage to the appliance. CAUTION! In case of presence of children, the AutoOpen system can be deactivated if you want to keep the door...
7.2 How to set an option The washing and drying phases are shorter. The total programme duration Some options are not compatible with decreases by approximately 50%. each other. When you set 2 options that The washing results are the same as...
ENGLISH 8. BEFORE FIRST USE The first time you activate the appliance recharge the resin in the water softener. it is necessary to set the language and It seems that the appliance is not time. Default language is English. working. The washing phase starts only after this procedure is completed.
Whether you use a standard detergent Water and salt can come out or multi-tabs (with or without salt), set from the salt container when the proper water hardness level to you fill it. Risk of corrosion. keep the salt refill indicator active.
ENGLISH 3. Remove the spilled rinse aid with an If you use multi-tablets and the drying absorbent cloth to prevent too much performance is satisfactory, the rinse aid foam. refill indication can be disabled by setting 4. Close the lid. Make sure that the lid the rinse aid level to 0.
Page 16
If the programme is applicable to the 3. Press repeatedly the navigation key option TimeSaver, you have to confirm on your right to increase the number Fast or Normal. of hours of the delay start. You can 5. Press the OK key, the programme delay the start of the programme starts.
ENGLISH The display shows Cancel delay and the OK key to confirm and close the following conditions:. appliance door. • Yes: Press the OK key and close • Select Stop to cancel the running the appliance door, the selected programme. Press the OK key to programme starts.
• Rinse aid dispensing can be • Remove remaining food from the deactivated when using multi-tablets, items. but we recommend to always use • Make soft the remaining burned food rinse aid for better drying on the items. performance.
ENGLISH 11. CARE AND CLEANING 3. Remove the flat filter (A). WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if 4.
CAUTION! An incorrect position of the filters can cause bad 4. To engage again the spray arm to washing results and damage the basket, press the spray arm to the appliance.
ENGLISH • To maintain the performance of your carefully the instructions on the appliance at its best, we recommend packaging of the product. to use monthly a specific cleaning product for dishwashers. Follow 12. TROUBLESHOOTING If the appliance does not start or it stops With some problems, the display during operation.
Page 22
12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes. • Clean spray arm jets and filter. Refer to "Care and Cleaning".
ENGLISH Problem Possible cause and solution There are residues of deter‐ • The detergent tablet got stuck in the dispenser and gent in the dispenser at the therefore was not completely washed away by wa‐ end of the programme. ter. •...
Power consumption Off-mode (W) 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian ener‐ gy), use the hot water supply to decrease energy consumption.