START button
PAUSE button
MANUAL button
AUTOMATIC button
Wash tank temperature display
Boiler temperature display
H
NORMAL MACHINE USE
H.1
Fitting of filters and overflows
CAUTION
The below operations must be performed
when the machine is cold and switched off.
Make sure that:
1. the filter is correctly installed;
1
3
2. the overflows are correctly installed;
14
Press this button to start the washing cycle.
Press this button to stop the washing cycle.
Select manual to send the basket with hand(the speed depends on the
operator )
Select automatic to send the basket with the same speed
Display the working temperature of the wash tank
Display the working temperature of the boiler
2
H.2
Fitting of wash and rinse arms
Make sure that:
1. the upper and lower washing arm are correctly installed;
2. the rinsing arm is correctly installed.