Installing the take-up reel core
1. Make sure that the lock lever is released
(turned to the left). Slide the movable unit to
the left end of the horizontal strut.
2. Slip one end of the take-up reel core over the
flanged knob on the drive unit.
3. Insert the flanged knob on the movable unit
into the other end of the take-up reel core.
8
4. Turn the lock lever to the front to lock the
movable unit.
Make sure the core is fixed properly.
Attaching the paper guides
After installing the Auto Take-up Reel Unit,
then attach the paper guides.