Connecting The Power Cord - Epson Stylus Pro 11880 Unpacking And Setup Manual

❏ Be careful not to touch the cables around the
print head; otherwise, the printer may be
damaged.
3. Close the front cover.

Connecting the power cord

1. Check the label on the back of the printer to
make sure the voltage required by the printer
matches that of the wall outlet. Also, make
sure that you have the correct power cord for
your power source.
2. Connect the power cord to the AC inlet on the
back of the printer.
3. Route the power cord through the clamps at
the rear of the printer. The cord can be routed
to either the left or right side.
4. Plug the power cord into a properly grounded
electrical outlet.
c
Caution:
Do not use an outlet that is controlled by an
automatic timer or wall switch. Otherwise,
accidental shut down or damage to your
printer may occur.
11