Installing The Ink Cartridges - Epson Stylus Pro 11880 Unpacking And Setup Manual

Installing the ink cartridges

To install the ink cartridges, follow the
instructions below.
w
Warnings:
The ink cartridges are self-contained units.
Under ordinary use, ink will not leak from the
cartridges. If ink does get on your hands, wash
them thoroughly with soap and water. If ink gets
into your eyes, flush them immediately with
water.
Note:
The ink cartridges packaged with your printer are
partly used during the initial setup. In order to produce
high-quality prints, the print head in your printer will
be fully charged with ink. This one-off process
consumes a quantity of ink and therefore these
cartridges print fewer pages compared to subsequent
ink cartridges.
1. Turn on the printer by pressing the Power
button.
2. When the light starts flashing and the cover is
slightly opened, then open it by hand fully.
12
3. Check the ink cartridge and its slot.
1 2 3 4 5
Slot No.
#1 Vivid Light Magenta
#2 Light Light Black
#3 Matte Black
#4 Light Black
#5 Light Cyan
#6 Cyan
#7 Vivid Magenta
#8 Photo Black
#9 Yellow
4. Remove the ink cartridge from the package,
and shake it for about 5 seconds.
c Caution:
Do not touch the green IC chip on the side
of the ink cartridge. Doing so may prevent
normal operation and printing.
6 7 8 9
Ink color