Installing The Printer Driver And Software - Epson Stylus Pro 11880 Unpacking And Setup Manual

Installing the Printer Driver and
Software
After connecting the printer to your computer,
you need to install the software included on the
Printer Software CD-ROM shipped with your
printer. To install your printer software, follow the
steps below.
Note:
Be sure that you have an administrator rights to install
the software.
1. Insert the Printer Software CD-ROM shipped
with your printer in the CD-ROM drive.
2. When the following dialog box appears,
install the printer driver according to your
connection. Select Set up the printer via a
local connection when the printer is
connected to the computer directly or Set up
the printer via a network connection when
the printer is connected to the network. Follow
the on-screen instructions.
Note:
If the following dialog box appears, make sure the
publisher is SEIKO EPSON, and then click
Unlock.
3. If you want to install other printer software,
select it from the dialog box in step 2.
Adding the printer for Mac OS X
After you have installed the printer software on
your computer, you need to select your printer.
You must select a printer the first time you use it
or whenever you want to switch to another
printer. Your computer will always print using the
last printer selected.
1. Turn on the printer.
2. Double-click the Applications folder, and
then double-click the Utilities folder.
Double-click Print Center (for Mac OS X
10.2.x) or Printer Setup Utility (for Mac OS X
10.3.x or later).
21