Epson Stylus Pro 11880 Unpacking And Setup Manual page 19

c
Caution:
Do not set the paper lever to the released
position while the Power light or Pause light
is flashing; otherwise, damage may occur.
4. Load the sheet into the paper insertion slot
until it comes out below.
Note:
Load the sheet vertically, like most magazines.
5. Make sure that the right and bottom edges of
the sheet are straight and in line with the
horizontal line and the vertical line.
Note:
❏ Align the paper correctly with the vertical and
horizontal setting positions. If the leading edge
of the paper extends beyond the paper setting
position or is short of it, it will cause an error.
❏ If the leading edge of the paper will not come
out from under the front cover, open the front
cover and feed the paper downwards.
6. Set the paper lever to the secured position.
Press the button or wait a while.
7. If DO YOU WANT TO USE THE FOLLOWING PAPER?
appears on the LCD panel, press the Menu
button to select the media, and then press the
Enter button to set the media.
The previous setting appears on the LCD
panel. If the media type is correct, press the
Paper Source button.
Now the printer is ready to print. While the printer
is printing, do not open the front cover. If the front
cover is opened while printing is in progress, the
printer stops printing, and then restarts printing
when the front cover is closed. Stopping and
restarting printing may reduce the print quality.
Note:
Do not leave the paper in the printer for a long period
of time; its quality will deteriorate. We recommend that
you remove the paper from the printer after printing.
17