Flex FX3411 Operator's Manual page 12

WARNING
product damage due to a short circuit, never
immerse your tool, battery pack or charger
in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc. can
cause a short circuit.
This Random Orbit Sander must be used only with the battery packs and chargers listed
below:
2.5Ah 3.5Ah
FX0111 FX0321
NOTICE: Please refer to the battery pack and charger manuals for detailed operating information.
ON/OFF SWITCH (FIG.6)
To turn the sander "ON", simply push the ON/
OFF switch.
To turn the sander "OFF", push the ON/OFF
switch again.
OPERATING INSTRUCTIONS
To reduce the risk of fire,
personal injury, and
Battery Pack
5.0Ah 6Ah
FX0121 FX0331 FX0221
WARNING
this product until the parts are replaced. Use
of this product with damaged or missing parts
could result in serious personal injury.
8.0Ah 10Ah 12Ah
FX0341 FX0231
Fig. 6
-12-
If any parts are damaged
or missing, do not operate
Charger
FLEX FLEX FLEX
FX0411 FX0421 FX0431
On/Off Switch
FLEX
FX0451